The Regulation replaces the test method required for checking if extender oils, used for the production of tyres or parts of tyres, contain concentration levels of PAHs above those set out in the restriction (No 50 in REACH Annex XVII). It also establishes a transitional period of 18 months (until 23 September 2016), during which both the old and the new analytical methods can be used, in order to give laboratories time to set up and obtain the necessary experience in running the test.
Annex XVII to Regulation (EC) No 1907/2006 is amended as follows:
(1) in entry 50, column 2, paragraph 1, the second subparagraph is replaced by the following subparagraphs:
| ‘The standard EN 16143:2013 (Petroleum products — Determination of content of Benzo (a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph. Until 23 September 2016, the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the correlation of the measured values with the PCA extract, is measured by the manufacturer or importer every six months or after each major operational change, whichever is earlier.’ |
(2) in entry 51, column 2, paragraph 3 is deleted;
(3) in entry 52, column 2, paragraph 3 is deleted.
It has removed the outdated reference to the requirement for the European Commission to re-evaluate two entries for phthalates, No 51 on DEHP, DBP and BBP, and No 52 on DINP, DIDP and DNOP, by 16 January 2010. These were completed in 2014 and concluded that no changes to the restrictions were necessary.
(EU) 2015/326
Contact us
Relen Su
Tel: +86 571 87206587
Fax: +86 571 89900719
Email:test@cirs-group.com
Add: 1/F,No,4 Building, Huaye Hi-Tech Industrial Park, No.1180, Bin’an Road, Binjiang District, Hangzhou, Zhejiang, China
Contact Us
Quick Navigation